Supply and installation of an outside tap with wall plate elbow and non-return valve. Covers core drilling through external wall, pipework connection, and isolation valve fitting.
Typical cost
£100 — £250
Typical duration
3-4 hours
Scope type
fixed
Typical tasks
Identify supply pipe location
Core drill through external wall
Run supply pipe and fit isolating valve
Fit wall plate elbow and outside tap
Test and confirm no drips or leaks
Extras & additional works
Based on a standard installation with easy access to the water supply. Costs may increase if additional plumbing work is required or if access is difficult.
Common questions Stainesai
The cost can be affected by the distance from the water supply, the need for additional plumbing work, and the complexity of the installation.
Generally, you do not need permission to install an outside tap, but it must comply with UK Water Regulations to prevent contamination.
Yes, it must comply with UK Water Regulations to ensure there is no risk of backflow contamination.
A standard installation typically takes 3-4 hours, depending on the complexity and access to the water supply.
Ensure that the installation includes a double check valve to comply with Water Regulations and prevent backflow. Always confirm with your tradesperson before work begins.
Ready to post a outside tap installation job?
Describe what you need. Stainesai structures it into a proper scope. Your first job post is free.